How to open / close the original Japanese canister?
1. Pull the ring and remove the lock rim
How to use flush fluid
1. Warm engine to operating temperature
Motor Oil
AK. AKINAWA® GOLD PAO SN 0W-40 100% Synthetic
Product Code
AK
API Grade
SN
SAE Viscosity
0W-40
Available Sizes
1L, 4L, 5L, 20L, 208L
AKINAWA® GOLD PAO SN 0W-40 100% Synthetic is modern, fully synthetic motor oil recommended for high - loaded gasoline engines. It is manufactured from Group-IV PAO and Group-III base stock combined with a modern system of enhancing additives of the latest API (American Petroleum Institute) service standard - SN. The newest ZDDP anti-wear additive package delivers the latest development in lubricating technology to maximize protection and cleanliness for the newest gasoline-fuelled engines.
Packing
1L
4L
5L
20L
208L
APPLICATION
AKINAWA® GOLD PAO SN 0W-40 100% Synthetic is designed for modern gasoline-fuelled engines operating under high load conditions. Maintains an exceptional level of protection properties throughout the service life of the product. Ensures effective lubrication at start up at low ambient temperatures and in tropical heat keeping speed at maximum power in a frequent start-stop mode in urban traffic and on the highway. Meets the most demanding requirements for modern engine emission control and fuel efficiency. Provides high protection from oxidation. Recommended for all-season use.
SPECIFICATIONS / APPROVALS
∙ API SN
APPLICATION BENEFITS
All-season fully synthetic motor oil AKINAWA® GOLD PAO SN 0W-40 100% Synthetic provides:
∙ Greater product's properties stability due to use of Poly-Alpha-Olefin base oil
∙ Improved compatibility with seal materials
∙ Extended drain interval
∙ Maximum engine cleanliness
∙ Easy cold start at as low as -42ºC
SPECIFICATIONS
The ZDDP anti-wear additive package deposits much less phosphorous on the face of the catalyst, significantly reducing the poisoning of the catalyst system.
The latest technologies of AKINAWA® OIL CORPORATION, Japan enable AKINAWA® GOLD PAO SN 0W-40 100% Synthetic to meet or exceed the requirements of such car manufacturers as BMW, MERCEDES-BENZ, VW, PEUGEOT, CITROEN and others.
TECHNICAL CHARACTERISTICS
| Technical property | Method | Result |
|---|---|---|
| SAE viscosity grade | SAE J300 | 0W-40 |
| Density at 15°C | ASTM D-4052 | 0,8449 |
| Flash point, °C | ASTM D-92 | 216 |
| TBN (mg KOH/g) | ASTM D-2896 | 6,90 |
| Pour point, °C | ASTM D-97 | -42 |
| Colour | ASTM D-1500 | 2,5 |
| Viscosity index | ASTM D-2270 | 183 |
| Kinematic viscosity at 40°C (cSt) | ASTM D-445 | 81,40 |
| Kinematic viscosity at 100°C (cSt) | ASTM D-445 | 14,34 |
Due to continual product research and development, the information contained herein is subject to change without notification.