How to open / close the original Japanese canister?
1. Pull the ring and remove the lock rim
How to use flush fluid
1. Warm engine to operating temperature
Motor Oil
AK. AKINAWA® MOLY-TRiMER SM 15W-50 Synthetic Blended
Product Code
AK
API Grade
SM
SAE Viscosity
15W-50
Available Sizes
1L, 4L, 5L, 20L, 208L
AKINAWA® MOLY-TRiMER SM 15W-50 Synthetic Blended is motor oil manufactured with an additive package integrating the newest MOLY-TRiMER technology. The fully soluble organic molybdenum compound contained in MOLY-TRiMER fills structural defects in the metal surface of the friction pair forming a lubricating film with a unique low friction coefficient, increasing engine service life.
Packing
1L
4L
5L
20L
208L
APPLICATION
AKINAWA® MOLY-TRiMER SM 15W-50 Synthetic Blended is designed for operating in a hot climate and also recommended for use in highly worn engines during warm season. It specially developed for vehicles with gasoline and light diesel engines, including passenger cars, SUVs, vans and light trucks. This product is suitable for car engines equipped with direct injection, engines with variable valve timing systems and turbocharged engines, operating under high loads conditions.
SPECIFICATIONS / APPROVALS
∙ API SM/CF
APPLICATION BENEFITS
AKINAWA® MOLY-TRiMER SM 15W-50 Synthetic Blended offers the following benefits:
∙ Reduced engine noise and vibration
∙ Low oil consumption through burning
∙ Maximum reduction of friction within the engine at high temperatures, and high load
∙ Increased life of the engine and turbocharger
SPECIFICATIONS
The latest technologies of AKINAWA® OIL CORPORATION, Japan enable engine oils manufactured by the company to exceed the requirements of such car manufacturers as: NISSAN, DAIHATSU, MITSUBISHI, SUZUKI, ALFA ROMEO, BMW, FIAT, HYUNDAI, LAND ROVER, PEUGEOT, RENAULT and others.
TECHNICAL CHARACTERISTICS
| Technical property | Method | Result |
|---|---|---|
| SAE viscosity grade | SAE J300 | 15W-50 |
| Density at 15°C | ASTM D-4052 | 0,8741 |
| Flash point, °C | ASTM D-92 | 235 |
| TBN (mg KOH/g) | ASTM D-2896 | 7,30 |
| Pour point, °C | ASTM D-97 | -30 |
| Colour | ASTM D-1500 | <3,0 |
| Viscosity index | ASTM D-2270 | 147 |
| Kinematic viscosity at 40°C (cSt) | ASTM D-445 | 147,80 |
| Kinematic viscosity at 100°C (cSt) | ASTM D-445 | 19,10 |
Due to continual product research and development, the information contained herein is subject to change without notification.