How to open / close the original Japanese canister?
1. Pull the ring and remove the lock rim
How to use flush fluid
1. Warm engine to operating temperature
Motor Oil
AK. AKINAWA® MOTOR OIL SN 10W-30 Synthetic Blended
Product Code
AK
API Grade
SN
SAE Viscosity
10W-30
Available Sizes
1L, 4L, 5L, 20L, 208L
AKINAWA® MOTOR OIL SN 10W-30 Synthetic Blended is resource conserving gasoline engine oil developed with a group of balanced additives from high quality synthetic components of base oils. This product meets the GF-5 standard, set by the International Lubricants Standardization and Approval Committee (ILSAC).
Packing
1L
4L
5L
20L
208L
APPLICATION
AKINAWA® MOTOR OIL SN 10W-30 ILSAC GF-5 Synthetic Blended is specially developed for all-season use in modern vehicles with gasoline engines, including passenger cars, vans, SUVs and light trucks. It is suitable for car engines equipped with direct injection (GDI, D-4, FSI, T-FSI, CGI, HPI and etc.), engines with variable valve timing systems and turbocharged engines.
SPECIFICATIONS / APPROVALS
∙ API SN
∙ ILSAC GF-5
APPLICATION BENEFITS
Application of AKINAWA® MOTOR OIL SN 10W-30 Synthetic Blended provides:
∙ Fuel economy
∙ Extended life of catalytic converters
∙ Cleanliness of engine valves
∙ Extended engine service life
∙ Improved compatibility with seal materials
∙ Complies with the latest environmental standards
SPECIFICATIONS
The latest technologies of AKINAWA® OIL CORPORATION, Japan and the ILSAC GF-5 standard enable MITASU MOTOR OIL SN 10W-30 Synthetic Blended to exceed the requirements of such car manufacturers as TOYOTA, LEXUS, NISSAN, HONDA, MAZDA, MITSUBISHI, SUZUKI, SUBARU, DAIHATSU, HYUNDAI, GM, FORD, MERCEDES-BENZ and others.
TECHNICAL CHARACTERISTICS
| Technical property | Method | Result |
|---|---|---|
| SAE viscosity grade | SAE J300 | 10W-30 |
| Density at 15°C | ASTM D-4052 | 0,8780 |
| Flash point, °C | ASTM D-92 | 219 |
| TBN (mg KOH/g) | ASTM D-2896 | 7,90 |
| Pour point, °C | ASTM D-97 | -36 |
| Colour | ASTM D-1500 | 2,0 |
| Viscosity index | ASTM D-2270 | 150 |
| Kinematic viscosity at 40°C (cSt) | ASTM D-445 | 70,80 |
| Kinematic viscosity at 100°C (cSt) | ASTM D-445 | 11,20 |
Due to continual product research and development, the information contained herein is subject to change without notification.